181212 and 030101: A/DE81/DE81F.HTM

For this page, see DE81 in English or DG81 in German.
For the previous page, see DE80 in English or DG80 in German.
For the next page, see DE82 in English or DG82 in German.
Back to the main page of this colour series, see ../DE in English or ../DG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see DE81L in English and DG81L in German,
S=Square root, see DE81S in English and DG81S in German,
Q=Quadratic, see DE81Q in English and DG81Q in German,
printer F, see DE81F in English and DG81F in German,
printer O, see DE81O in English and DG81O in German,
printer T, see DE81T in English and DG81T in German.

Fig. C2 of achromatic ISO/IEC-test chart 3
Colour Workflow (CW) by the input operators no. 0 to 5
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
F81E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
F81E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operators no. 0 to 5
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operators no. 0 to 5
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F81E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F81E00FP.PS / TXT / PDF F81E00FP.DAT
F81E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F81E01FP.PS / TXT / PDF F81E01FP.DAT
F81E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F81E02FP.PS / TXT / PDF F81E02FP.DAT
F81E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F81E03FP.PS / TXT / PDF F81E03FP.DAT
F81E04NP.PS / TXT / PDF   4 lab* setcolor F81E04FP.PS / TXT / PDF F81E04FP.DAT
F81E05NP.PS / TXT / PDF  5 LAB* setcolor F81E05FP.PS / TXT / PDF F81E05FP.DAT
F81E06NP.PS / TXT / PDF  6 000n* setcmykcolor F81E06FP.PS / TXT / PDF F81E06FP.DAT
F81E07NP.PS / TXT / PDF  7 w* setgray F81E07FP.PS / TXT / PDF F81E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operators no. 0 to 5 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operators no. 0 to 5
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operators no. 0 to 5
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
F81E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor F81E00FA.PS / TXT F81E00FA.DAT
F81E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray F81E01FA.PS / TXT F81E01FA.DAT
F81E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor F81E02FA.PS / TXT F81E02FA.DAT
F81E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor F81E03FA.PS / TXT F81E03FA.DAT
F81E04NA.PS / TXT   4 lab* setcolor F81E04FA.PS / TXT F81E04FA.DAT
F81E05NA.PS / TXT  5 LAB* setcolor F81E05FA.PS / TXT F81E05FA.DAT
F81E06NA.PS / TXT  6 000n* setcmykcolor F81E06FA.PS / TXT F81E06FA.DAT
F81E07NA.PS / TXT  7 w* setgray F81E07FA.PS / TXT F81E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operators no. 0 to 5 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operators no. 0 to 5
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operators no. 0 to 5
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F81E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F81E00SP.PS / TXT / PDF F81E00SP.DAT
F81E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F81E01SP.PS / TXT / PDF F81E01SP.DAT
F81E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F81E02SP.PS / TXT / PDF F81E02SP.DAT
F81E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F81E03SP.PS / TXT / PDF *) F81E03SP.DAT
F81E04NP.PS / TXT / PDF   4 lab* setcolor F81E04SP.PS / TXT / PDF F81E04SP.DAT
F81E05NP.PS / TXT / PDF  5 LAB* setcolor F81E05SP.PS / TXT / PDF F81E05SP.DAT
F81E06NP.PS / TXT / PDF  6 000n* setcmykcolor F81E06SP.PS / TXT / PDF F81E06SP.DAT
F81E07NP.PS / TXT / PDF  7 w* setgray F81E07SP.PS / TXT / PDF F81E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operators no. 0 to 5 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file F81E03SP.PS with the file F81E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file F81E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operators no. 0 to 5
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operators no. 0 to 5
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F81E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F81E10FP.PS / TXT / PDF F81E10FP.DAT
F81E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F81E11FP.PS / TXT / PDF F81E11FP.DAT
F81E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F81E12FP.PS / TXT / PDF F81E12FP.DAT
F81E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F81E13FP.PS / TXT / PDF F81E13FP.DAT
F81E14NP.PS / TXT / PDF   4 lab* setcolor F81E14FP.PS / TXT / PDF F81E14FP.DAT
F81E15NP.PS / TXT / PDF  5 LAB* setcolor F81E15FP.PS / TXT / PDF F81E15FP.DAT
F81E16NP.PS / TXT / PDF  6 000n* setcmykcolor F81E16FP.PS / TXT / PDF F81E16FP.DAT
F81E17NP.PS / TXT / PDF  7 w* setgray F81E17FP.PS / TXT / PDF F81E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operators no. 0 to 5 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operators no. 0 to 5
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operators no. 0 to 5
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
F81E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor F81E10FA.PS / TXT F81E10FA.DAT
F81E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray F81E11FA.PS / TXT F81E11FA.DAT
F81E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor F81E12FA.PS / TXT F81E12FA.DAT
F81E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor F81E13FA.PS / TXT F81E13FA.DAT
F81E14NA.PS / TXT   4 lab* setcolor F81E14FA.PS / TXT F81E14FA.DAT
F81E15NA.PS / TXT  5 LAB* setcolor F81E15FA.PS / TXT F81E15FA.DAT
F81E16NA.PS / TXT  6 000n* setcmykcolor F81E16FA.PS / TXT F81E16FA.DAT
F81E17NA.PS / TXT  7 w* setgray F81E17FA.PS / TXT F81E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operators no. 0 to 5 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operators no. 0 to 5
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operators no. 0 to 5
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F81E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F81E10SP.PS / TXT / PDF F81E10SP.DAT
F81E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F81E11SP.PS / TXT / PDF F81E11SP.DAT
F81E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F81E12SP.PS / TXT / PDF F81E12SP.DAT
F81E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F81E13SP.PS / TXT / PDF *) F81E13SP.DAT
F81E14NP.PS / TXT / PDF   4 lab* setcolor F81E14SP.PS / TXT / PDF F81E14SP.DAT
F81E15NP.PS / TXT / PDF  5 LAB* setcolor F81E15SP.PS / TXT / PDF F81E15SP.DAT
F81E16NP.PS / TXT / PDF  6 000n* setcmykcolor F81E16SP.PS / TXT / PDF F81E16SP.DAT
F81E17NP.PS / TXT / PDF  7 w* setgray F81E17SP.PS / TXT / PDF F81E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operators no. 0 to 5 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file F81E13SP.PS with the file F81E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file F81E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder DE81, see
../DE.HTM in English or ../DG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.