181212 and 030101: A/DE87/DE87S.HTM

For this page, see DE87 in English or DG87 in German.
For the previous page, see DE86 in English or DG86 in German.
For the next page, see DE88 in English or DG88 in German.
Back to the main page of this colour series, see ../DE in English or ../DG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see DE87L in English and DG87L in German,
S=Square root, see DE87S in English and DG87S in German,
Q=Quadratic, see DE87Q in English and DG87Q in German,
printer F, see DE87F in English and DG87F in German,
printer O, see DE87O in English and DG87O in German,
printer T, see DE87T in English and DG87T in German.

Achromatic ISO/IEC-test chart 3, w* input
Colour Workflow (CW) by the input operator no. 1
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
S87E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
S87E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
S87E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor S87E00FP.PS / TXT / PDF S87E00FP.DAT
S87E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray S87E01FP.PS / TXT / PDF S87E01FP.DAT
S87E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor S87E02FP.PS / TXT / PDF S87E02FP.DAT
S87E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor S87E03FP.PS / TXT / PDF S87E03FP.DAT
S87E04NP.PS / TXT / PDF   4 lab* setcolor S87E04FP.PS / TXT / PDF S87E04FP.DAT
S87E05NP.PS / TXT / PDF  5 LAB* setcolor S87E05FP.PS / TXT / PDF S87E05FP.DAT
S87E06NP.PS / TXT / PDF  6 000n* setcmykcolor S87E06FP.PS / TXT / PDF S87E06FP.DAT
S87E07NP.PS / TXT / PDF  7 w* setgray S87E07FP.PS / TXT / PDF S87E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 1
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
S87E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor S87E00FA.PS / TXT S87E00FA.DAT
S87E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray S87E01FA.PS / TXT S87E01FA.DAT
S87E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor S87E02FA.PS / TXT S87E02FA.DAT
S87E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor S87E03FA.PS / TXT S87E03FA.DAT
S87E04NA.PS / TXT   4 lab* setcolor S87E04FA.PS / TXT S87E04FA.DAT
S87E05NA.PS / TXT  5 LAB* setcolor S87E05FA.PS / TXT S87E05FA.DAT
S87E06NA.PS / TXT  6 000n* setcmykcolor S87E06FA.PS / TXT S87E06FA.DAT
S87E07NA.PS / TXT  7 w* setgray S87E07FA.PS / TXT S87E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 1 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
S87E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor S87E00SP.PS / TXT / PDF S87E00SP.DAT
S87E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray S87E01SP.PS / TXT / PDF S87E01SP.DAT
S87E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor S87E02SP.PS / TXT / PDF S87E02SP.DAT
S87E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor S87E03SP.PS / TXT / PDF *) S87E03SP.DAT
S87E04NP.PS / TXT / PDF   4 lab* setcolor S87E04SP.PS / TXT / PDF S87E04SP.DAT
S87E05NP.PS / TXT / PDF  5 LAB* setcolor S87E05SP.PS / TXT / PDF S87E05SP.DAT
S87E06NP.PS / TXT / PDF  6 000n* setcmykcolor S87E06SP.PS / TXT / PDF S87E06SP.DAT
S87E07NP.PS / TXT / PDF  7 w* setgray S87E07SP.PS / TXT / PDF S87E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file S87E03SP.PS with the file S87E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file S87E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
S87E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor S87E10FP.PS / TXT / PDF S87E10FP.DAT
S87E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray S87E11FP.PS / TXT / PDF S87E11FP.DAT
S87E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor S87E12FP.PS / TXT / PDF S87E12FP.DAT
S87E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor S87E13FP.PS / TXT / PDF S87E13FP.DAT
S87E14NP.PS / TXT / PDF   4 lab* setcolor S87E14FP.PS / TXT / PDF S87E14FP.DAT
S87E15NP.PS / TXT / PDF  5 LAB* setcolor S87E15FP.PS / TXT / PDF S87E15FP.DAT
S87E16NP.PS / TXT / PDF  6 000n* setcmykcolor S87E16FP.PS / TXT / PDF S87E16FP.DAT
S87E17NP.PS / TXT / PDF  7 w* setgray S87E17FP.PS / TXT / PDF S87E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 1
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
S87E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor S87E10FA.PS / TXT S87E10FA.DAT
S87E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray S87E11FA.PS / TXT S87E11FA.DAT
S87E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor S87E12FA.PS / TXT S87E12FA.DAT
S87E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor S87E13FA.PS / TXT S87E13FA.DAT
S87E14NA.PS / TXT   4 lab* setcolor S87E14FA.PS / TXT S87E14FA.DAT
S87E15NA.PS / TXT  5 LAB* setcolor S87E15FA.PS / TXT S87E15FA.DAT
S87E16NA.PS / TXT  6 000n* setcmykcolor S87E16FA.PS / TXT S87E16FA.DAT
S87E17NA.PS / TXT  7 w* setgray S87E17FA.PS / TXT S87E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 1 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
S87E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor S87E10SP.PS / TXT / PDF S87E10SP.DAT
S87E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray S87E11SP.PS / TXT / PDF S87E11SP.DAT
S87E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor S87E12SP.PS / TXT / PDF S87E12SP.DAT
S87E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor S87E13SP.PS / TXT / PDF *) S87E13SP.DAT
S87E14NP.PS / TXT / PDF   4 lab* setcolor S87E14SP.PS / TXT / PDF S87E14SP.DAT
S87E15NP.PS / TXT / PDF  5 LAB* setcolor S87E15SP.PS / TXT / PDF S87E15SP.DAT
S87E16NP.PS / TXT / PDF  6 000n* setcmykcolor S87E16SP.PS / TXT / PDF S87E16SP.DAT
S87E17NP.PS / TXT / PDF  7 w* setgray S87E17SP.PS / TXT / PDF S87E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file S87E13SP.PS with the file S87E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file S87E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder DE87, see
../DE.HTM in English or ../DG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.