181212 and 030101: A/JE86/JE86A.HTM

For this page, see JE86 in English or JG86 in German.
For the previous page, see JE85 in English or JG85 in German.
For the next page, see JE87 in English or JG87 in German.
Back to the main page of this colour series, see ../JE in English or ../JG in German.

For this page without and with MTL code (N and F file) for OL with CJEXYZ data of luminous colours and room luminance reflectances:
Yr=0.00, see JE86A in English and JG86A in German
Yr=2.52 (standard), see JE86B in English and JG86B in German
Yr=5.04, see JE86C in English and JG86C in German
Yr=7.56, see JE86D in English and JG86D in German

Achromatic ISO/IEC-test chart 3, 000n* input
Colour Workflow (CW) by the input operator no. 0
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N File (N = No MTL code in the file), see
A86E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout uses the MTL code with example "linear direct" CIEXYZ output data
for luminance reflectance Yr=0.00 in the F File (F = MTL code in the File)
which produce "equal" output compared to Fig. 1, see
A86E00F1.PS / TXT / JPG / PDF

Remark: The files of the tables 1 to 3 include the linearising data for one of the model devices A, C, D (=Linear spaced in CIELAB for the room reflections Yr=0,00, 5,04, 7.06 ) and the tables 4 to 6 include the same linearising data for the same model devices but allow to modify the CIEXYZ data for the linearized monitor output equally spaced for the different room reflections.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A86E00FP.PS / TXT / PDF A86E00FP.DAT
A86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A86E01FP.PS / TXT / PDF A86E01FP.DAT
A86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A86E02FP.PS / TXT / PDF A86E02FP.DAT
A86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A86E03FP.PS / TXT / PDF A86E03FP.DAT
A86E04NP.PS / TXT / PDF   4 lab* setcolor A86E04FP.PS / TXT / PDF A86E04FP.DAT
A86E05NP.PS / TXT / PDF  5 LAB* setcolor A86E05FP.PS / TXT / PDF A86E05FP.DAT
A86E06NP.PS / TXT / PDF  6 000n* setcmykcolor A86E06FP.PS / TXT / PDF A86E06FP.DAT
A86E07NP.PS / TXT / PDF  7 w* setgray A86E07FP.PS / TXT / PDF A86E07FP.DAT

Table 1: For PDF start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
A86E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor A86E00FA.PS / TXT A86E00FA.DAT
A86E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray A86E01FA.PS / TXT A86E01FA.DAT
A86E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor A86E02FA.PS / TXT A86E02FA.DAT
A86E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor A86E03FA.PS / TXT A86E03FA.DAT
A86E04NA.PS / TXT   4 lab* setcolor A86E04FA.PS / TXT A86E04FA.DAT
A86E05NA.PS / TXT  5 LAB* setcolor A86E05FA.PS / TXT A86E05FA.DAT
A86E06NA.PS / TXT  6 000n* setcmykcolor A86E06FA.PS / TXT A86E06FA.DAT
A86E07NA.PS / TXT  7 w* setgray A86E07FA.PS / TXT A86E07FA.DAT

Table 2: For PS start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A86E00SP.PS / TXT / PDF *) A86E00SP.DAT
A86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A86E01SP.PS / TXT / PDF A86E01SP.DAT
A86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A86E02SP.PS / TXT / PDF A86E02SP.DAT
A86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A86E03SP.PS / TXT / PDF A86E03SP.DAT
A86E04NP.PS / TXT / PDF   4 lab* setcolor A86E04SP.PS / TXT / PDF A86E04SP.DAT
A86E05NP.PS / TXT / PDF  5 LAB* setcolor A86E05SP.PS / TXT / PDF A86E05SP.DAT
A86E06NP.PS / TXT / PDF  6 000n* setcmykcolor A86E06SP.PS / TXT / PDF A86E06SP.DAT
A86E07NP.PS / TXT / PDF  7 w* setgray A86E07SP.PS / TXT / PDF A86E07SP.DAT

Table 3: For PDF start output with linearising data for one of the model devices A, C, D in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file A86E00SP.PS with the file A86E00SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file A86E00FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Remark: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A86E10FP.PS / TXT / PDF A86E10FP.DAT
A86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A86E11FP.PS / TXT / PDF A86E11FP.DAT
A86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A86E12FP.PS / TXT / PDF A86E12FP.DAT
A86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A86E13FP.PS / TXT / PDF A86E13FP.DAT
A86E14NP.PS / TXT / PDF   4 lab* setcolor A86E14FP.PS / TXT / PDF A86E14FP.DAT
A86E15NP.PS / TXT / PDF  5 LAB* setcolor A86E15FP.PS / TXT / PDF A86E15FP.DAT
A86E16NP.PS / TXT / PDF  6 000n* setcmykcolor A86E16FP.PS / TXT / PDF A86E16FP.DAT
A86E17NP.PS / TXT / PDF  7 w* setgray A86E17FP.PS / TXT / PDF A86E17FP.DAT

Table 4: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrscc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
A86E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor A86E10FA.PS / TXT A86E10FA.DAT
A86E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray A86E11FA.PS / TXT A86E11FA.DAT
A86E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor A86E12FA.PS / TXT A86E12FA.DAT
A86E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor A86E13FA.PS / TXT A86E13FA.DAT
A86E14NA.PS / TXT   4 lab* setcolor A86E14FA.PS / TXT A86E14FA.DAT
A86E15NA.PS / TXT  5 LAB* setcolor A86E15FA.PS / TXT A86E15FA.DAT
A86E16NA.PS / TXT  6 000n* setcmykcolor A86E16FA.PS / TXT A86E16FA.DAT
A86E17NA.PS / TXT  7 w* setgray A86E17FA.PS / TXT A86E17FA.DAT

Table 5: For PS linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A86E10SP.PS / TXT / PDF *) A86E10SP.DAT
A86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A86E11SP.PS / TXT / PDF A86E11SP.DAT
A86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A86E12SP.PS / TXT / PDF A86E12SP.DAT
A86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A86E13SP.PS / TXT / PDF A86E13SP.DAT
A86E14NP.PS / TXT / PDF   4 lab* setcolor A86E14SP.PS / TXT / PDF A86E14SP.DAT
A86E15NP.PS / TXT / PDF  5 LAB* setcolor A86E15SP.PS / TXT / PDF A86E15SP.DAT
A86E16NP.PS / TXT / PDF  6 000n* setcmykcolor A86E16SP.PS / TXT / PDF A86E16SP.DAT
A86E17NP.PS / TXT / PDF  7 w* setgray A86E17SP.PS / TXT / PDF A86E17SP.DAT

Table 6: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file A86E10SP.PS with the file A86E10SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file A86E10FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder JE86, see
../JE.HTM in English or ../JG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.