181212 and 030101: A/JE87/JE87A.HTM

For this page, see JE87 in English or JG87 in German.
For the previous page, see JE86 in English or JG86 in German.
For the next page, see JE88 in English or JG88 in German.
Back to the main page of this colour series, see ../JE in English or ../JG in German.

For this page without and with MTL code (N and F file) for OL with CJEXYZ data of luminous colours and room luminance reflectances:
Yr=0.00, see JE87A in English and JG87A in German
Yr=2.52 (standard), see JE87B in English and JG87B in German
Yr=5.04, see JE87C in English and JG87C in German
Yr=7.56, see JE87D in English and JG87D in German

Achromatic ISO/IEC-test chart 3, w* input
Colour Workflow (CW) by the input operator no. 1
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N File (N = No MTL code in the file), see
A87E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout uses the MTL code with example "linear direct" CIEXYZ output data
for luminance reflectance Yr=0.00 in the F File (F = MTL code in the File)
which produce "equal" output compared to Fig. 1, see
A87E00F1.PS / TXT / JPG / PDF

Remark: The files of the tables 1 to 3 include the linearising data for one of the model devices A, C, D (=Linear spaced in CIELAB for the room reflections Yr=0,00, 5,04, 7.06 ) and the tables 4 to 6 include the same linearising data for the same model devices but allow to modify the CIEXYZ data for the linearized monitor output equally spaced for the different room reflections.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A87E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A87E00FP.PS / TXT / PDF A87E00FP.DAT
A87E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A87E01FP.PS / TXT / PDF A87E01FP.DAT
A87E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A87E02FP.PS / TXT / PDF A87E02FP.DAT
A87E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A87E03FP.PS / TXT / PDF A87E03FP.DAT
A87E04NP.PS / TXT / PDF   4 lab* setcolor A87E04FP.PS / TXT / PDF A87E04FP.DAT
A87E05NP.PS / TXT / PDF  5 LAB* setcolor A87E05FP.PS / TXT / PDF A87E05FP.DAT
A87E06NP.PS / TXT / PDF  6 000n* setcmykcolor A87E06FP.PS / TXT / PDF A87E06FP.DAT
A87E07NP.PS / TXT / PDF  7 w* setgray A87E07FP.PS / TXT / PDF A87E07FP.DAT

Table 1: For PDF start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* All the files are on the www server.

Input PS operator no. 1
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
A87E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor A87E00FA.PS / TXT A87E00FA.DAT
A87E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray A87E01FA.PS / TXT A87E01FA.DAT
A87E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor A87E02FA.PS / TXT A87E02FA.DAT
A87E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor A87E03FA.PS / TXT A87E03FA.DAT
A87E04NA.PS / TXT   4 lab* setcolor A87E04FA.PS / TXT A87E04FA.DAT
A87E05NA.PS / TXT  5 LAB* setcolor A87E05FA.PS / TXT A87E05FA.DAT
A87E06NA.PS / TXT  6 000n* setcmykcolor A87E06FA.PS / TXT A87E06FA.DAT
A87E07NA.PS / TXT  7 w* setgray A87E07FA.PS / TXT A87E07FA.DAT

Table 2: For PS start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 1 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A87E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A87E00SP.PS / TXT / PDF *) A87E00SP.DAT
A87E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A87E01SP.PS / TXT / PDF A87E01SP.DAT
A87E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A87E02SP.PS / TXT / PDF A87E02SP.DAT
A87E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A87E03SP.PS / TXT / PDF A87E03SP.DAT
A87E04NP.PS / TXT / PDF   4 lab* setcolor A87E04SP.PS / TXT / PDF A87E04SP.DAT
A87E05NP.PS / TXT / PDF  5 LAB* setcolor A87E05SP.PS / TXT / PDF A87E05SP.DAT
A87E06NP.PS / TXT / PDF  6 000n* setcmykcolor A87E06SP.PS / TXT / PDF A87E06SP.DAT
A87E07NP.PS / TXT / PDF  7 w* setgray A87E07SP.PS / TXT / PDF A87E07SP.DAT

Table 3: For PDF start output with linearising data for one of the model devices A, C, D in Startup (S); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file A87E00SP.PS with the file A87E00SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file A87E00FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Remark: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A87E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A87E10FP.PS / TXT / PDF A87E10FP.DAT
A87E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A87E11FP.PS / TXT / PDF A87E11FP.DAT
A87E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A87E12FP.PS / TXT / PDF A87E12FP.DAT
A87E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A87E13FP.PS / TXT / PDF A87E13FP.DAT
A87E14NP.PS / TXT / PDF   4 lab* setcolor A87E14FP.PS / TXT / PDF A87E14FP.DAT
A87E15NP.PS / TXT / PDF  5 LAB* setcolor A87E15FP.PS / TXT / PDF A87E15FP.DAT
A87E16NP.PS / TXT / PDF  6 000n* setcmykcolor A87E16FP.PS / TXT / PDF A87E16FP.DAT
A87E17NP.PS / TXT / PDF  7 w* setgray A87E17FP.PS / TXT / PDF A87E17FP.DAT

Table 4: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 1
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the
output PS operators no. 0 to 7
defined by i*ptrscc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
A87E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor A87E10FA.PS / TXT A87E10FA.DAT
A87E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray A87E11FA.PS / TXT A87E11FA.DAT
A87E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor A87E12FA.PS / TXT A87E12FA.DAT
A87E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor A87E13FA.PS / TXT A87E13FA.DAT
A87E14NA.PS / TXT   4 lab* setcolor A87E14FA.PS / TXT A87E14FA.DAT
A87E15NA.PS / TXT  5 LAB* setcolor A87E15FA.PS / TXT A87E15FA.DAT
A87E16NA.PS / TXT  6 000n* setcmykcolor A87E16FA.PS / TXT A87E16FA.DAT
A87E17NA.PS / TXT  7 w* setgray A87E17FA.PS / TXT A87E17FA.DAT

Table 5: For PS linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 1 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 1
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 1
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
A87E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor A87E10SP.PS / TXT / PDF *) A87E10SP.DAT
A87E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray A87E11SP.PS / TXT / PDF A87E11SP.DAT
A87E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor A87E12SP.PS / TXT / PDF A87E12SP.DAT
A87E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor A87E13SP.PS / TXT / PDF A87E13SP.DAT
A87E14NP.PS / TXT / PDF   4 lab* setcolor A87E14SP.PS / TXT / PDF A87E14SP.DAT
A87E15NP.PS / TXT / PDF  5 LAB* setcolor A87E15SP.PS / TXT / PDF A87E15SP.DAT
A87E16NP.PS / TXT / PDF  6 000n* setcmykcolor A87E16SP.PS / TXT / PDF A87E16SP.DAT
A87E17NP.PS / TXT / PDF  7 w* setgray A87E17SP.PS / TXT / PDF A87E17SP.DAT

Table 6: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 1 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file A87E10SP.PS with the file A87E10SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file A87E10FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder JE87, see
../JE.HTM in English or ../JG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.