181212 and 030101: A/KE86/KE86B.HTM

For this page, see KE86 in English or KG86 in German.
For the previous page, see KE85 in English or KG85 in German.
For the next page, see KE87 in English or KG87 in German.
Back to the main page of this colour series, see ../KE in English or ../KG in German.

For this page without and with MTL code (N and F file) for OL with CJEXYZ data of luminous colours and room luminance reflectances:
Yr=0.00, see KE86A in English and KG86A in German
Yr=2.52 (standard), see KE86B in English and KG86B in German
Yr=5.04, see KE86C in English and KG86C in German
Yr=7.56, see KE86D in English and KG86D in German

Achromatic ISO/IEC-test chart 3, 000n* input
Colour Workflow (CW) by the input operator no. 0
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N File (N = No MTL code in the file), see
B86E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout uses the MTL code with example "linear direct" CIEXYZ output data
for luminance reflectance Yr=0.00 in the F File (F = MTL code in the File)
which produce "equal" output compared to Fig. 1, see
B86E00F1.PS / TXT / JPG / PDF

Remark: The files of the tables 1 to 3 include the linearising data for one of the model devices A, C, D (=Linear spaced in CIELAB for the room reflections Yr=0,00, 5,04, 7.06 ) and the tables 4 to 6 include the same linearising data for the same model devices but allow to modify the CIEXYZ data for the linearized monitor output equally spaced for the different room reflections.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
B86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor B86E00FP.PS / TXT / PDF B86E00FP.DAT
B86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray B86E01FP.PS / TXT / PDF B86E01FP.DAT
B86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor B86E02FP.PS / TXT / PDF B86E02FP.DAT
B86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor B86E03FP.PS / TXT / PDF B86E03FP.DAT
B86E04NP.PS / TXT / PDF   4 lab* setcolor B86E04FP.PS / TXT / PDF B86E04FP.DAT
B86E05NP.PS / TXT / PDF  5 LAB* setcolor B86E05FP.PS / TXT / PDF B86E05FP.DAT
B86E06NP.PS / TXT / PDF  6 000n* setcmykcolor B86E06FP.PS / TXT / PDF B86E06FP.DAT
B86E07NP.PS / TXT / PDF  7 w* setgray B86E07FP.PS / TXT / PDF B86E07FP.DAT

Table 1: For PDF start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
B86E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor B86E00FA.PS / TXT B86E00FA.DAT
B86E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray B86E01FA.PS / TXT B86E01FA.DAT
B86E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor B86E02FA.PS / TXT B86E02FA.DAT
B86E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor B86E03FA.PS / TXT B86E03FA.DAT
B86E04NA.PS / TXT   4 lab* setcolor B86E04FA.PS / TXT B86E04FA.DAT
B86E05NA.PS / TXT  5 LAB* setcolor B86E05FA.PS / TXT B86E05FA.DAT
B86E06NA.PS / TXT  6 000n* setcmykcolor B86E06FA.PS / TXT B86E06FA.DAT
B86E07NA.PS / TXT  7 w* setgray B86E07FA.PS / TXT B86E07FA.DAT

Table 2: For PS start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
B86E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor B86E00SP.PS / TXT / PDF B86E00SP.DAT
B86E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray B86E01SP.PS / TXT / PDF B86E01SP.DAT
B86E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor B86E02SP.PS / TXT / PDF B86E02SP.DAT
B86E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor B86E03SP.PS / TXT / PDF *) B86E03SP.DAT
B86E04NP.PS / TXT / PDF   4 lab* setcolor B86E04SP.PS / TXT / PDF B86E04SP.DAT
B86E05NP.PS / TXT / PDF  5 LAB* setcolor B86E05SP.PS / TXT / PDF B86E05SP.DAT
B86E06NP.PS / TXT / PDF  6 000n* setcmykcolor B86E06SP.PS / TXT / PDF B86E06SP.DAT
B86E07NP.PS / TXT / PDF  7 w* setgray B86E07SP.PS / TXT / PDF B86E07SP.DAT

Table 3: For PDF start output with linearising data for one of the model devices A, C, D in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file B86E00SP.PS with the file B86E00SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file B86E00FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Remark: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
B86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor B86E10FP.PS / TXT / PDF B86E10FP.DAT
B86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray B86E11FP.PS / TXT / PDF B86E11FP.DAT
B86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor B86E12FP.PS / TXT / PDF B86E12FP.DAT
B86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor B86E13FP.PS / TXT / PDF B86E13FP.DAT
B86E14NP.PS / TXT / PDF   4 lab* setcolor B86E14FP.PS / TXT / PDF B86E14FP.DAT
B86E15NP.PS / TXT / PDF  5 LAB* setcolor B86E15FP.PS / TXT / PDF B86E15FP.DAT
B86E16NP.PS / TXT / PDF  6 000n* setcmykcolor B86E16FP.PS / TXT / PDF B86E16FP.DAT
B86E17NP.PS / TXT / PDF  7 w* setgray B86E17FP.PS / TXT / PDF B86E17FP.DAT

Table 4: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 0
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrscc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
B86E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor B86E10FA.PS / TXT B86E10FA.DAT
B86E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray B86E11FA.PS / TXT B86E11FA.DAT
B86E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor B86E12FA.PS / TXT B86E12FA.DAT
B86E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor B86E13FA.PS / TXT B86E13FA.DAT
B86E14NA.PS / TXT   4 lab* setcolor B86E14FA.PS / TXT B86E14FA.DAT
B86E15NA.PS / TXT  5 LAB* setcolor B86E15FA.PS / TXT B86E15FA.DAT
B86E16NA.PS / TXT  6 000n* setcmykcolor B86E16FA.PS / TXT B86E16FA.DAT
B86E17NA.PS / TXT  7 w* setgray B86E17FA.PS / TXT B86E17FA.DAT

Table 5: For PS linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 0
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 0
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
B86E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor B86E10SP.PS / TXT / PDF B86E10SP.DAT
B86E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray B86E11SP.PS / TXT / PDF B86E11SP.DAT
B86E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor B86E12SP.PS / TXT / PDF B86E12SP.DAT
B86E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor B86E13SP.PS / TXT / PDF *) B86E13SP.DAT
B86E14NP.PS / TXT / PDF   4 lab* setcolor B86E14SP.PS / TXT / PDF B86E14SP.DAT
B86E15NP.PS / TXT / PDF  5 LAB* setcolor B86E15SP.PS / TXT / PDF B86E15SP.DAT
B86E16NP.PS / TXT / PDF  6 000n* setcmykcolor B86E16SP.PS / TXT / PDF B86E16SP.DAT
B86E17NP.PS / TXT / PDF  7 w* setgray B86E17SP.PS / TXT / PDF B86E17SP.DAT

Table 6: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file B86E10SP.PS with the file B86E10SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file B86E10FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder KE86, see
../KE.HTM in English or ../KG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.