181101 and 030601: A/CE00/CE00.HTM

For this page, see CE00 in English or CG00 in German.
For the previous page, see CE99 in English or CG99 in German.
For the next page, see CE01 in English or CG01 in German.
Back to the main page of this colour series, see ../CE in English or ../CG in German.

BAM-test chart no. CE00 in reflectance mode
Test chart no. 1 according to ISO/IEC 15775
Four pages of FP-file with output specification

Colour Reproduction and device output: Colour Workflow (CW) by the input operator setgray and
equal output PS operator and without or with MFL code for Output Linearisation (OL)


Fig. LN1: Output layout of all the L...NP files with the format A6 (here) and A4 in the following tables no. 1 to 3, see L00E00N1.PS / TXT / JPG / PDF


Fig. LF1: Output layout of all the L...FP files with the format A6 (here) and A4 in the following tables no. 1 to 3, see L00E00F1.PS / TXT / JPG / PDF

Remark 1: The files* of Tables 1 to 3 may produce more than one page layout shown in Fig. LN1

Remark 2: The files* of Tables 1 to 3 produce the format A4 landscape.

Input PS operator setgray
and start files
*NP.PS / .TXT /.PDF
140 / 140 / 40 kByte

Output
PS operator
parameter
i*ptrsc

No colorimetric transfer from the
input PS operator setgray
to the output PS operator setgray
defined by i*ptrsc

Output Linearisation by File (F)
with device CIELAB data
of device L
in files *FP.PS / TXT / PDF
240 / 240 / 140 kByte

PostScript MTL code in File (F)
with device CIELAB data
of device L
100 kByte
L00E00NP.PS / TXT / PDF =0,1,2, or 3   L00E00FP.PS / TXT / PDF L00E00FP.DAT
Table 1: Files for the PDF start and linearised output with linearising data of the device L in the File (F); Input PS operator setgray in the NP file and equal output PS operator in the FP file.

Remark: The files* of Table 1 serve for a PDF output with linearisation data in the File (F) and not for a PS output.
* All the files are on www.ps.bam.de.

Input PS operator setgray
and start files
*NA.PS / .TXT
140 / 140 kByte

Output
PS operator
parameter
i*ptrsc

No colorimetric transfer from the
input PS operator setgray
to the output PS operator setgray
defined by i*ptrsc

Output Linearisation by File (F)
with device CIELAB data
of device L
in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code in File (F)
with device CIELAB data
of device L
100 kByte
L00E00NA.PS / TXT =0,1,2, or 3   L00E00FA.PS / TXT L00E00FA.DAT
Table 2: Files for the PS start and linearised output with linearising data of the device L in the File (F); Input PS operator setgray in the NA file and equal output PS operator in the FP file.

Remark: The files* of Table 2 serve for a PS output and not for a PDF output.

Input PS operator setgray
and start files
*NP.PS / .TXT /.PDF
140 / 140 / 40 kByte

Output
PS operator
parameter
i*ptrsc

No colorimetric transfer from the
input PS operator setgray
to the output PS operator setgray
defined by i*ptrsc

Output Linearisation with Startup (S)
without device CIELAB data
of device L
in files *SP.PS / TXT / PDF
240 / 240 / 140 kByte

PostScript MTL code for Startup (S)
with device CIELAB data
of device L
100 kByte
L00E00NP.PS / TXT / PDF =0,1,2, or 3   L00E00SP.PS / TXT / PDF *) L00E00SP.DAT
Table 3: Files for the PDF start and linearised output with linearising data of the device L in the Startup (S); Input PS operator setgray in the NP file and equal output PS operator in the FP file.

*) Please transfer e. g. the PDF file L00E00SP.PS with the file L00E00SP.DAT in the Distiller Startup (S) Directory, which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output as the file L00E00FP.PDF of the Table 2. All the files L00E1xSP.PS (x=0,7) of the Table 3 are distilled with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: The files* of Table 3 serve for a PDF output with linearisation data L00E00SP.DAT in the Distiller Startup (S) directory and not for a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder CE00, see
../CE.HTM in English or ../CG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.