Fig. LN1: Output layout of all the L...NP files with the format A6 (here) and A4 in the following tables no. 1 to 3, see L69E00N1.PS / TXT / JPG / PDF
181101 and 030601: A/CE69/CE69.HTM
For this page, see
CE69 in English or
CG69 in German.
For the previous page, see
CE68 in English or
CG68 in German.
For the next page, see
CE70 in English or
CG70 in German.
Back to the main page of this colour series, see
../CE in English or
../CG in German.
Colour Workflow
(CW) by the input operator no. 0 to 3 (000n*, w*, nnn0*, www*) and
equal output PS operator and without or with MFL code for Output
Linearisation (OL)
Any NP file produces 1 page for a maximum luminous contrast ratio
of the (ideal) display without reflection of any room lighting.
Any FP file (of Table 1 to 3) shows 8 gray series on 2 to 8 pages
for 8 different contrast ratios which depend on the display reflection
for white and black in the office.
The 16 steps and the Landolt-rings are recognized best only for
one of the 8 gray series.
The PS file may be used for the correction of the initial display
output either by 16 measured Y luminance reflectance data (see directories
..60 to 69) or 16 L* lightness data
(see directories ..70 to ..78).
For this page without and
with MTL code for OL with CIELAB data of surface colours,
for the device L=Linear,
see CE69L in english
or CG69L in german
The output of the S...FP files is darker compared to the output of the L...FP files. For all the files S...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see CE69S in english or CG69S in german
The output of the Q...FP files is lighter compared to the output of the L...FP files. For all the files Q...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see CE69Q in english or CG69Q in german
Fig. LN1: Output layout of all the L...NP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see L69E00N1.PS
/ TXT / JPG
/ PDF
Fig. LF1: Output layout of all the L...FP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see L69E00F1.PS
/ TXT / JPG
/ PDF
Fig. SF1: Output layout of all the S...FP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see S69E00F1.PS
/ TXT / JPG
/ PDF
Fig. QF1: Output layout of all the Q...FP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see Q69E00F1.PS
/ TXT / JPG
/ PDF
Remark 1: The files* of Tables 1 to 3 may produce more than one page layout shown in Fig. LN1
Remark 2: The files* of Tables 1 to 3 produce the format A4 landscape.
Remark 3: The files* of Tables 1 to 3 include the linearising data for the device L = S and Q for the linearized output on this device L. The output of the FP file for the devices S and Q is darker and lighter compared to the output of the device L.
|
and start files *NP.PS / .TXT /.PDF 140 / 140 / 40 kByte |
PS operator parameter i*ptrsc |
input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) to the output PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) defined by i*ptrsc |
with device CIELAB data of device L in files *FP.PS / TXT / PDF 240 / 240 / 140 kByte |
with device CIELAB data of device L 100 kByte |
| L69E00NP.PS / TXT / PDF | =0,1,2, or 3 | L69E00FP.PS / TXT / PDF | L69E00FP.DAT |
Remark: The files* of Table 1 serve for
a PDF output with linearisation data in the File (F) and not for
a PS output.
* All the files are on www.ps.bam.de.
|
and start files *NA.PS / .TXT 140 / 140 kByte |
PS operator parameter i*ptrsc |
input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) to the output PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) defined by i*ptrsc |
with device CIELAB data of device L in files *FA.PS / TXT 240 / 240 kByte |
with device CIELAB data of device L 100 kByte |
| L69E00NA.PS / TXT | =0,1,2, or 3 | L69E00FA.PS / TXT | L69E00FA.DAT |
Remark: The files* of Table 2 serve for a PS output and not for a PDF output.
|
and start files *NP.PS / .TXT /.PDF 140 / 140 / 40 kByte |
PS operator parameter i*ptrsc |
input PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) to the output PS operator no. 0 to 3 (000n*, w*, nnn0*, www*) defined by i*ptrsc |
without device CIELAB data of device L in files *SP.PS / TXT / PDF 240 / 240 / 140 kByte |
with device CIELAB data of device L 100 kByte |
| L69E00NP.PS / TXT / PDF | =0,1,2, or 3 | L69E00SP.PS / TXT / PDF *) | L69E00SP.DAT |
*) Please transfer e. g. the PDF file L69E00SP.PS with the file L69E00SP.DAT in the Distiller Startup (S) Directory, which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output as the file L69E00FP.PDF of the Table 2. All the files L69E1xSP.PS (x=0,7) of the Table 3 are distilled with only the default file Example.ps in the Distiller Startup (S) Directory.
Remark: The files* of Table 3 serve for a PDF output with linearisation data L69E00SP.DAT in the Distiller Startup (S) directory and not for a PS output.
-------
For an introduction (archive 2000-2009) to all folders
compared to this folder CE69, see
../CE.HTM in English or
../CG.HTM in German.
For information (archive 2000-2009) about International and
National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or
../4STAG.html in German.
For information (archive 2000-2009) about colour test charts
and colorimetric calculations, see
../indexAE.html in English or
../indexAG.html in German.
For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or
../XY91AG.html in German.
Back to the main page of the TU web site
(not archive), see
../../index.html in English or
../../indexDE.html in German.
The last link may not work, if you have visited
directly this archive site.
Then go to the main page of one of the
two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.