181212 and 030101: A/EE89/EE89F.HTM

For this page, see EE89 in English or EG89 in German.
For the previous page, see EE88 in English or EG88 in German.
For the next page, see EE90 in English or EG90 in German.
Back to the main page of this colour series, see ../EE in English or ../EG in German.

For this page without and with MTL code (N and F file) for OL with CIELAB data of surface colours for different devices:
L=Linear, see EE89L in English and EG89L in German,
S=Square root, see EE89S in English and EG89S in German,
Q=Quadratic, see EE89Q in English and EG89Q in German,
printer F, see EE89F in English and EG89F in German,
printer O, see EE89O in English and EG89O in German,
printer T, see EE89T in English and EG89T in German.

Achromatic ISO/IEC-test chart 3, www* input
Colour Workflow (CW) by the input operator no. 3
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N-File (N = No MTL code in the file), see
F89E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout with MTL code of example CIELAB output data of the device L (L=Linear) in the F-File (F = MTL code in the File), see
F89E00F1.PS / TXT / JPG / PDF

Remark 1: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F89E00FP.PS / TXT / PDF F89E00FP.DAT
F89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F89E01FP.PS / TXT / PDF F89E01FP.DAT
F89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F89E02FP.PS / TXT / PDF F89E02FP.DAT
F89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F89E03FP.PS / TXT / PDF F89E03FP.DAT
F89E04NP.PS / TXT / PDF   4 lab* setcolor F89E04FP.PS / TXT / PDF F89E04FP.DAT
F89E05NP.PS / TXT / PDF  5 LAB* setcolor F89E05FP.PS / TXT / PDF F89E05FP.DAT
F89E06NP.PS / TXT / PDF  6 000n* setcmykcolor F89E06FP.PS / TXT / PDF F89E06FP.DAT
F89E07NP.PS / TXT / PDF  7 w* setgray F89E07FP.PS / TXT / PDF F89E07FP.DAT

Table 1: For PDF start output with linearising data (L=Linear) in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
F89E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor F89E00FA.PS / TXT F89E00FA.DAT
F89E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray F89E01FA.PS / TXT F89E01FA.DAT
F89E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor F89E02FA.PS / TXT F89E02FA.DAT
F89E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor F89E03FA.PS / TXT F89E03FA.DAT
F89E04NA.PS / TXT   4 lab* setcolor F89E04FA.PS / TXT F89E04FA.DAT
F89E05NA.PS / TXT  5 LAB* setcolor F89E05FA.PS / TXT F89E05FA.DAT
F89E06NA.PS / TXT  6 000n* setcmykcolor F89E06FA.PS / TXT F89E06FA.DAT
F89E07NA.PS / TXT  7 w* setgray F89E07FA.PS / TXT F89E07FA.DAT

Table 2: For PS start output with linearising data (L=Linear) in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F89E00SP.PS / TXT / PDF F89E00SP.DAT
F89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F89E01SP.PS / TXT / PDF F89E01SP.DAT
F89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F89E02SP.PS / TXT / PDF F89E02SP.DAT
F89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F89E03SP.PS / TXT / PDF *) F89E03SP.DAT
F89E04NP.PS / TXT / PDF   4 lab* setcolor F89E04SP.PS / TXT / PDF F89E04SP.DAT
F89E05NP.PS / TXT / PDF  5 LAB* setcolor F89E05SP.PS / TXT / PDF F89E05SP.DAT
F89E06NP.PS / TXT / PDF  6 000n* setcmykcolor F89E06SP.PS / TXT / PDF F89E06SP.DAT
F89E07NP.PS / TXT / PDF  7 w* setgray F89E07SP.PS / TXT / PDF F89E07SP.DAT

Table 3: For PDF start output with linearising data (L=Linear) in Startup (S); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file F89E03SP.PS with the file F89E03SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file F89E03FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F89E10FP.PS / TXT / PDF F89E10FP.DAT
F89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F89E11FP.PS / TXT / PDF F89E11FP.DAT
F89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F89E12FP.PS / TXT / PDF F89E12FP.DAT
F89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F89E13FP.PS / TXT / PDF F89E13FP.DAT
F89E14NP.PS / TXT / PDF   4 lab* setcolor F89E14FP.PS / TXT / PDF F89E14FP.DAT
F89E15NP.PS / TXT / PDF  5 LAB* setcolor F89E15FP.PS / TXT / PDF F89E15FP.DAT
F89E16NP.PS / TXT / PDF  6 000n* setcmykcolor F89E16FP.PS / TXT / PDF F89E16FP.DAT
F89E17NP.PS / TXT / PDF  7 w* setgray F89E17FP.PS / TXT / PDF F89E17FP.DAT

Table 4: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
F89E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor F89E10FA.PS / TXT F89E10FA.DAT
F89E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray F89E11FA.PS / TXT F89E11FA.DAT
F89E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor F89E12FA.PS / TXT F89E12FA.DAT
F89E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor F89E13FA.PS / TXT F89E13FA.DAT
F89E14NA.PS / TXT   4 lab* setcolor F89E14FA.PS / TXT F89E14FA.DAT
F89E15NA.PS / TXT  5 LAB* setcolor F89E15FA.PS / TXT F89E15FA.DAT
F89E16NA.PS / TXT  6 000n* setcmykcolor F89E16FA.PS / TXT F89E16FA.DAT
F89E17NA.PS / TXT  7 w* setgray F89E17FA.PS / TXT F89E17FA.DAT

Table 5: For PS linearized output with linearising data of the device (S, Q, F, O or T) in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
F89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor F89E10SP.PS / TXT / PDF F89E10SP.DAT
F89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray F89E11SP.PS / TXT / PDF F89E11SP.DAT
F89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor F89E12SP.PS / TXT / PDF F89E12SP.DAT
F89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor F89E13SP.PS / TXT / PDF *) F89E13SP.DAT
F89E14NP.PS / TXT / PDF   4 lab* setcolor F89E14SP.PS / TXT / PDF F89E14SP.DAT
F89E15NP.PS / TXT / PDF  5 LAB* setcolor F89E15SP.PS / TXT / PDF F89E15SP.DAT
F89E16NP.PS / TXT / PDF  6 000n* setcmykcolor F89E16SP.PS / TXT / PDF F89E16SP.DAT
F89E17NP.PS / TXT / PDF  7 w* setgray F89E17SP.PS / TXT / PDF F89E17SP.DAT

Table 6: For PDF linearized output with linearising data of the device (S, Q, F, O or T) in Startup (S); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file F89E13SP.PS with the file F89E13SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=3. Then this PDF-file produces the same output ans the file F89E13FP.PDF of the Table 5. All L..SP files of the Table 6 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder EE89, see
../EE.HTM in English or ../EG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.