181212 and 030101: A/KE89/KE89C.HTM

For this page, see KE89 in English or KG89 in German.
For the previous page, see KE88 in English or KG88 in German.
For the next page, see KE90 in English or KG90 in German.
Back to the main page of this colour series, see ../KE in English or ../KG in German.

For this page without and with MTL code (N and F file) for OL with CJEXYZ data of luminous colours and room luminance reflectances:
Yr=0.00, see KE89A in English and KG89A in German
Yr=2.52 (standard), see KE89B in English and KG89B in German
Yr=5.04, see KE89C in English and KG89C in German
Yr=7.56, see KE89D in English and KG89D in German

Achromatic ISO/IEC-test chart 3, www* input
Colour Workflow (CW) by the input operator no. 3
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N File (N = No MTL code in the file), see
C89E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout uses the MTL code with example "linear direct" CIEXYZ output data
for luminance reflectance Yr=0.00 in the F File (F = MTL code in the File)
which produce "equal" output compared to Fig. 1, see
C89E00F1.PS / TXT / JPG / PDF

Remark: The files of the tables 1 to 3 include the linearising data for one of the model devices A, C, D (=Linear spaced in CIELAB for the room reflections Yr=0,00, 5,04, 7.06 ) and the tables 4 to 6 include the same linearising data for the same model devices but allow to modify the CIEXYZ data for the linearized monitor output equally spaced for the different room reflections.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
C89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor C89E00FP.PS / TXT / PDF C89E00FP.DAT
C89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray C89E01FP.PS / TXT / PDF C89E01FP.DAT
C89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor C89E02FP.PS / TXT / PDF C89E02FP.DAT
C89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor C89E03FP.PS / TXT / PDF C89E03FP.DAT
C89E04NP.PS / TXT / PDF   4 lab* setcolor C89E04FP.PS / TXT / PDF C89E04FP.DAT
C89E05NP.PS / TXT / PDF  5 LAB* setcolor C89E05FP.PS / TXT / PDF C89E05FP.DAT
C89E06NP.PS / TXT / PDF  6 000n* setcmykcolor C89E06FP.PS / TXT / PDF C89E06FP.DAT
C89E07NP.PS / TXT / PDF  7 w* setgray C89E07FP.PS / TXT / PDF C89E07FP.DAT

Table 1: For PDF start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
C89E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor C89E00FA.PS / TXT C89E00FA.DAT
C89E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray C89E01FA.PS / TXT C89E01FA.DAT
C89E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor C89E02FA.PS / TXT C89E02FA.DAT
C89E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor C89E03FA.PS / TXT C89E03FA.DAT
C89E04NA.PS / TXT   4 lab* setcolor C89E04FA.PS / TXT C89E04FA.DAT
C89E05NA.PS / TXT  5 LAB* setcolor C89E05FA.PS / TXT C89E05FA.DAT
C89E06NA.PS / TXT  6 000n* setcmykcolor C89E06FA.PS / TXT C89E06FA.DAT
C89E07NA.PS / TXT  7 w* setgray C89E07FA.PS / TXT C89E07FA.DAT

Table 2: For PS start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
C89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor C89E00SP.PS / TXT / PDF C89E00SP.DAT
C89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray C89E01SP.PS / TXT / PDF C89E01SP.DAT
C89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor C89E02SP.PS / TXT / PDF C89E02SP.DAT
C89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor C89E03SP.PS / TXT / PDF *) C89E03SP.DAT
C89E04NP.PS / TXT / PDF   4 lab* setcolor C89E04SP.PS / TXT / PDF C89E04SP.DAT
C89E05NP.PS / TXT / PDF  5 LAB* setcolor C89E05SP.PS / TXT / PDF C89E05SP.DAT
C89E06NP.PS / TXT / PDF  6 000n* setcmykcolor C89E06SP.PS / TXT / PDF C89E06SP.DAT
C89E07NP.PS / TXT / PDF  7 w* setgray C89E07SP.PS / TXT / PDF C89E07SP.DAT

Table 3: For PDF start output with linearising data for one of the model devices A, C, D in Startup (S); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file C89E00SP.PS with the file C89E00SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file C89E00FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Remark: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
C89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor C89E10FP.PS / TXT / PDF C89E10FP.DAT
C89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray C89E11FP.PS / TXT / PDF C89E11FP.DAT
C89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor C89E12FP.PS / TXT / PDF C89E12FP.DAT
C89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor C89E13FP.PS / TXT / PDF C89E13FP.DAT
C89E14NP.PS / TXT / PDF   4 lab* setcolor C89E14FP.PS / TXT / PDF C89E14FP.DAT
C89E15NP.PS / TXT / PDF  5 LAB* setcolor C89E15FP.PS / TXT / PDF C89E15FP.DAT
C89E16NP.PS / TXT / PDF  6 000n* setcmykcolor C89E16FP.PS / TXT / PDF C89E16FP.DAT
C89E17NP.PS / TXT / PDF  7 w* setgray C89E17FP.PS / TXT / PDF C89E17FP.DAT

Table 4: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrscc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
C89E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor C89E10FA.PS / TXT C89E10FA.DAT
C89E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray C89E11FA.PS / TXT C89E11FA.DAT
C89E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor C89E12FA.PS / TXT C89E12FA.DAT
C89E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor C89E13FA.PS / TXT C89E13FA.DAT
C89E14NA.PS / TXT   4 lab* setcolor C89E14FA.PS / TXT C89E14FA.DAT
C89E15NA.PS / TXT  5 LAB* setcolor C89E15FA.PS / TXT C89E15FA.DAT
C89E16NA.PS / TXT  6 000n* setcmykcolor C89E16FA.PS / TXT C89E16FA.DAT
C89E17NA.PS / TXT  7 w* setgray C89E17FA.PS / TXT C89E17FA.DAT

Table 5: For PS linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
C89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor C89E10SP.PS / TXT / PDF C89E10SP.DAT
C89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray C89E11SP.PS / TXT / PDF C89E11SP.DAT
C89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor C89E12SP.PS / TXT / PDF C89E12SP.DAT
C89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor C89E13SP.PS / TXT / PDF *) C89E13SP.DAT
C89E14NP.PS / TXT / PDF   4 lab* setcolor C89E14SP.PS / TXT / PDF C89E14SP.DAT
C89E15NP.PS / TXT / PDF  5 LAB* setcolor C89E15SP.PS / TXT / PDF C89E15SP.DAT
C89E16NP.PS / TXT / PDF  6 000n* setcmykcolor C89E16SP.PS / TXT / PDF C89E16SP.DAT
C89E17NP.PS / TXT / PDF  7 w* setgray C89E17SP.PS / TXT / PDF C89E17SP.DAT

Table 6: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file C89E10SP.PS with the file C89E10SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file C89E10FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder KE89, see
../KE.HTM in English or ../KG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.