181212 and 030101: A/KE89/KE89D.HTM

For this page, see KE89 in English or KG89 in German.
For the previous page, see KE88 in English or KG88 in German.
For the next page, see KE90 in English or KG90 in German.
Back to the main page of this colour series, see ../KE in English or ../KG in German.

For this page without and with MTL code (N and F file) for OL with CJEXYZ data of luminous colours and room luminance reflectances:
Yr=0.00, see KE89A in English and KG89A in German
Yr=2.52 (standard), see KE89B in English and KG89B in German
Yr=5.04, see KE89C in English and KG89C in German
Yr=7.56, see KE89D in English and KG89D in German

Achromatic ISO/IEC-test chart 3, www* input
Colour Workflow (CW) by the input operator no. 3
and different output PS operators and Output Linearisation (OL)


Fig. 1: Output layout without the MTL code in the N File (N = No MTL code in the file), see
D89E00N1.PS / TXT / JPG / PDF


Fig. 2: Output layout uses the MTL code with example "linear direct" CIEXYZ output data
for luminance reflectance Yr=0.00 in the F File (F = MTL code in the File)
which produce "equal" output compared to Fig. 1, see
D89E00F1.PS / TXT / JPG / PDF

Remark: The files of the tables 1 to 3 include the linearising data for one of the model devices A, C, D (=Linear spaced in CIELAB for the room reflections Yr=0,00, 5,04, 7.06 ) and the tables 4 to 6 include the same linearising data for the same model devices but allow to modify the CIEXYZ data for the linearized monitor output equally spaced for the different room reflections.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
D89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor D89E00FP.PS / TXT / PDF D89E00FP.DAT
D89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray D89E01FP.PS / TXT / PDF D89E01FP.DAT
D89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor D89E02FP.PS / TXT / PDF D89E02FP.DAT
D89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor D89E03FP.PS / TXT / PDF D89E03FP.DAT
D89E04NP.PS / TXT / PDF   4 lab* setcolor D89E04FP.PS / TXT / PDF D89E04FP.DAT
D89E05NP.PS / TXT / PDF  5 LAB* setcolor D89E05FP.PS / TXT / PDF D89E05FP.DAT
D89E06NP.PS / TXT / PDF  6 000n* setcmykcolor D89E06FP.PS / TXT / PDF D89E06FP.DAT
D89E07NP.PS / TXT / PDF  7 w* setgray D89E07FP.PS / TXT / PDF D89E07FP.DAT

Table 1: For PDF start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
D89E00NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor D89E00FA.PS / TXT D89E00FA.DAT
D89E01NA.PS / TXT  1 olv* setrgbcolor and w* setgray D89E01FA.PS / TXT D89E01FA.DAT
D89E02NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor D89E02FA.PS / TXT D89E02FA.DAT
D89E03NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor D89E03FA.PS / TXT D89E03FA.DAT
D89E04NA.PS / TXT   4 lab* setcolor D89E04FA.PS / TXT D89E04FA.DAT
D89E05NA.PS / TXT  5 LAB* setcolor D89E05FA.PS / TXT D89E05FA.DAT
D89E06NA.PS / TXT  6 000n* setcmykcolor D89E06FA.PS / TXT D89E06FA.DAT
D89E07NA.PS / TXT  7 w* setgray D89E07FA.PS / TXT D89E07FA.DAT

Table 2: For PS start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
D89E00NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor D89E00SP.PS / TXT / PDF D89E00SP.DAT
D89E01NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray D89E01SP.PS / TXT / PDF D89E01SP.DAT
D89E02NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor D89E02SP.PS / TXT / PDF D89E02SP.DAT
D89E03NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor D89E03SP.PS / TXT / PDF *) D89E03SP.DAT
D89E04NP.PS / TXT / PDF   4 lab* setcolor D89E04SP.PS / TXT / PDF D89E04SP.DAT
D89E05NP.PS / TXT / PDF  5 LAB* setcolor D89E05SP.PS / TXT / PDF D89E05SP.DAT
D89E06NP.PS / TXT / PDF  6 000n* setcmykcolor D89E06SP.PS / TXT / PDF D89E06SP.DAT
D89E07NP.PS / TXT / PDF  7 w* setgray D89E07SP.PS / TXT / PDF D89E07SP.DAT

Table 3: For PDF start output with linearising data for one of the model devices A, C, D in Startup (S); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file D89E00SP.PS with the file D89E00SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file D89E00FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

Remark: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
D89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor D89E10FP.PS / TXT / PDF D89E10FP.DAT
D89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray D89E11FP.PS / TXT / PDF D89E11FP.DAT
D89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor D89E12FP.PS / TXT / PDF D89E12FP.DAT
D89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor D89E13FP.PS / TXT / PDF D89E13FP.DAT
D89E14NP.PS / TXT / PDF   4 lab* setcolor D89E14FP.PS / TXT / PDF D89E14FP.DAT
D89E15NP.PS / TXT / PDF  5 LAB* setcolor D89E15FP.PS / TXT / PDF D89E15FP.DAT
D89E16NP.PS / TXT / PDF  6 000n* setcmykcolor D89E16FP.PS / TXT / PDF D89E16FP.DAT
D89E17NP.PS / TXT / PDF  7 w* setgray D89E17FP.PS / TXT / PDF D89E17FP.DAT

Table 4: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 3
and start files

*NA.PS / .TXT
140 / 140 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrscc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *FA.PS / TXT
240 / 240 kByte

PostScript MTL code used for output
100 kByte
D89E10NA.PS / TXT  0 cmy0* setcmykcolor and 000n* setcmykcolor D89E10FA.PS / TXT D89E10FA.DAT
D89E11NA.PS / TXT  1 olv* setrgbcolor and w* setgray D89E11FA.PS / TXT D89E11FA.DAT
D89E12NA.PS / TXT  2 cmy0* setcmykcolor and nnn0* setcmykcolor D89E12FA.PS / TXT D89E12FA.DAT
D89E13NA.PS / TXT  3 olv* setrgbcolor and www* setrgbcolor D89E13FA.PS / TXT D89E13FA.DAT
D89E14NA.PS / TXT   4 lab* setcolor D89E14FA.PS / TXT D89E14FA.DAT
D89E15NA.PS / TXT  5 LAB* setcolor D89E15FA.PS / TXT D89E15FA.DAT
D89E16NA.PS / TXT  6 000n* setcmykcolor D89E16FA.PS / TXT D89E16FA.DAT
D89E17NA.PS / TXT  7 w* setgray D89E17FA.PS / TXT D89E17FA.DAT

Table 5: For PS linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.

Input PS operator no. 3
and start files

*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte
Output
PS operator
parameter
i*ptrsc
Colorimetric transfer from the
input PS operator no. 3
to the
output PS operators no. 0 to 7
defined by i*ptrsc

Output Linearisation with
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF
240 / 240 / 25 kByte

PostScript MTL code used for output
100 kByte
D89E10NP.PS / TXT / PDF  0 cmy0* setcmykcolor and 000n* setcmykcolor D89E10SP.PS / TXT / PDF D89E10SP.DAT
D89E11NP.PS / TXT / PDF  1 olv* setrgbcolor and w* setgray D89E11SP.PS / TXT / PDF D89E11SP.DAT
D89E12NP.PS / TXT / PDF  2 cmy0* setcmykcolor and nnn0* setcmykcolor D89E12SP.PS / TXT / PDF D89E12SP.DAT
D89E13NP.PS / TXT / PDF  3 olv* setrgbcolor and www* setrgbcolor D89E13SP.PS / TXT / PDF *) D89E13SP.DAT
D89E14NP.PS / TXT / PDF   4 lab* setcolor D89E14SP.PS / TXT / PDF D89E14SP.DAT
D89E15NP.PS / TXT / PDF  5 LAB* setcolor D89E15SP.PS / TXT / PDF D89E15SP.DAT
D89E16NP.PS / TXT / PDF  6 000n* setcmykcolor D89E16SP.PS / TXT / PDF D89E16SP.DAT
D89E17NP.PS / TXT / PDF  7 w* setgray D89E17SP.PS / TXT / PDF D89E17SP.DAT

Table 6: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 3 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Please transfer e. g. the PDF file D89E10SP.PS with the file D89E10SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file D89E10FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

-------
For an introduction (archive 2000-2009) to all folders compared to this folder KE89, see
../KE.HTM in English or ../KG.HTM in German.

For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or ../4STAG.html in German.

For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or ../indexAG.html in German.

For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or ../XY91AG.html in German.

Back to the main page of the TU web site (not archive), see
../../index.html in English or ../../indexDE.html in German.

The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.