A/BE70/BE70.HTM

181101 and 040801: A/BE70/BE70.HTM

For this page, see BE70 in English or BG70 in German.
For the previous page, see BE69 in English or BG69 in German.
For the next page, see BE71 in English or BG71 in German.
Back to the main page of this colour series, see ../BE in English or ../BG in German.

DIN-test chart no. 2 of DIN 33871, form 3, A4 landscape
Yield and emission: Colour Workflow (CW) by the input operator no. 0
and different output PS operators and Output Linearisation (OL)

Fig. 1: Output layout of all the files in the following tables 1 to 3, see L70E00NA.EPS / GIF / PDF

This page includes files for the following application:
DIN-test chart no. 2 of DIN 33871, form 3, A4 landscape, Colour Workflow (CW) and Output Linearisation (OL)

For Output Linearisation (OL) CIELAB data are used in the files.

Table 1 includes the output files of the Portable Document format (L..NP.PS/TXT/PDF and L..FP.PS/TXT/PDF).
Table 2 includes the output files of the PostScript format (L..NA.PS/TXT and L..FA.PS/TXT).
Table 3 includes the output files of the Portable Document format (L..NP.PS/TXT/PDF and L..SP.PS/TXT/PDF).

To indicate the Colour Workflow (CW) at the output different file names are used. The files have usually the same PS content

The PS content of the files L..NP.PS, L..NA.PS and L..SP.PS of the Tables 1 to 3 is identical and includes no MTL code.
The PS content of the files L..FP.PS and L..FA.PS of the Tables 1 and 2 is identical and includes the MTL code L..FP.DAT or L..FA.DAT in the file (F).

The output of the files L..FP.PDF and L..SP.PDF must be identical if the MTL code L..SP.DAT is stored within the Distiller Startup Directory during distilling of the PS file L..SP.PS. The files L..FP.PDF and L..SP.PDF have been produced by the software Adobe Acrobat DIstiller Version 3.0. In the first case the MTL code is located in the file L..FP.PS and in the second case the MTL code L..FP.DAT = L..SP.DAT is not in the file L..SP.PS but in the Startup (S) directory of the software Adobe Acrobat DIstiller.

Input PS operator no. 0
and start files
*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte Output
PS operator
parameter
i*ptrsc Colorimetric transfer of the
input PS operator no. 0 to the
output PS operators no. 0 to 7
defined by i*ptrsc
Output Linearisation with
L=Linear data (no change of scaling of output) in files
*FP.PS / TXT / PDF
240 / 240 / 25 kByte
PostScript MTL code used for output
100 kByte

L70E00NP.PS / TXT / PDF 0 cmy0* setcmykcolor and 000n* setcmykcolor L70E00FP.PS / TXT / PDF L70E00FP.DAT

L70E01NP.PS / TXT / PDF 1 olv* setrgbcolor and w* setgray L70E01FP.PS / TXT / PDF L70E01FP.DAT

L70E02NP.PS / TXT / PDF 2 cmy0* setcmykcolor and nnn0* setcmykcolor L70E02FP.PS / TXT / PDF L70E02FP.DAT

L70E03NP.PS / TXT / PDF 3 olv* setrgbcolor and www* setrgbcolor L70E03FP.PS / TXT / PDF L70E03FP.DAT

L70E04NP.PS / TXT / PDF 4 lab* setcolor L70E04FP.PS / TXT / PDF L70E04FP.DAT

L70E05NP.PS / TXT / PDF 5 LAB* setcolor L70E05FP.PS / TXT / PDF L70E05FP.DAT

L70E06NP.PS / TXT / PDF 6 000n* setcmykcolor L70E06FP.PS / TXT / PDF L70E06FP.DAT

L70E07NP.PS / TXT / PDF 7 w* setgray L70E07FP.PS / TXT / PDF L70E07FP.DAT

Table 1: For PDF output with linearising data in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.

Remark: With the files of Table 1 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.

Input PS operator no. 0
and start files
*NA.PS / .TXT
140 / 140 kByte Output
PS operator
parameter
i*ptrsc Colorimetric transfer of the
input PS operator no. 0 to the
output PS operators no. 0 to 7
defined by i*ptrsc
Output Linearisation with
L=Linear data (no change of scaling of output) in files
*FA.PS / TXT
240 / 240 kByte
PostScript MTL code used for output
100 kByte

L70E00NA.PS / TXT 0 cmy0* setcmykcolor and 000n* setcmykcolor L70E00FA.PS / TXT L70E00FA.DAT

L70E01NA.PS / TXT 1 olv* setrgbcolor and w* setgray L70E01FA.PS / TXT L70E01FA.DAT

L70E02NA.PS / TXT 2 cmy0* setcmykcolor and nnn0* setcmykcolor L70E02FA.PS / TXT L70E02FA.DAT

L70E03NA.PS / TXT 3 olv* setrgbcolor and www* setrgbcolor L70E03FA.PS / TXT L70E03FA.DAT

L70E04NA.PS / TXT 4 lab* setcolor L70E04FA.PS / TXT L70E04FA.DAT

L70E05NA.PS / TXT 5 LAB* setcolor L70E05FA.PS / TXT L70E05FA.DAT

L70E06NA.PS / TXT 6 000n* setcmykcolor L70E06FA.PS / TXT L70E06FA.DAT

L70E07NA.PS / TXT 7 w* setgray L70E07FA.PS / TXT L70E07FA.DAT

Table 2: For PS output with linearising data in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.

Remark: With the files of Table 2 it is intended to produce only a PS output and not a PDF output.

The files of the tables 1 to 3 are available for different devices instead of the model device L=Linear. Every device produces with all NP files the same start output. Only for the model device L=Linear of the table 2 the output of the NP and FP in one row is identical. For devices which produce equal output for corresponding colours the output of all FP files in one collum is identical at least for i*ptrsc=0 to 3.

Input PS operator no. 0
and start files
*NP.PS / .TXT /.PDF
140 / 140 / 25 kByte Output
PS operator
parameter
i*ptrsc Colorimetric transfer of the
input PS operator no. 0 to the
output PS operators no. 0 to 7
defined by i*ptrsc
Output Linearisation with
L=Linear data (no change of scaling of output) in files
*SP.PS / TXT / PDF
240 / 240 / 25 kByte
PostScript MTL code used for output
100 kByte

L70E00NP.PS / TXT / PDF 0 cmy0* setcmykcolor and 000n* setcmykcolor L70E00SP.PS / TXT / PDF L70E00SP.DAT

L70E01NP.PS / TXT / PDF 1 olv* setrgbcolor and w* setgray L70E01SP.PS / TXT / PDF L70E01SP.DAT

L70E02NP.PS / TXT / PDF 2 cmy0* setcmykcolor and nnn0* setcmykcolor L70E02SP.PS / TXT / PDF L70E02SP.DAT

L70E03NP.PS / TXT / PDF 3 olv* setrgbcolor and www* setrgbcolor L70E03SP.PS / TXT / PDF *) L70E03SP.DAT

L70E04NP.PS / TXT / PDF 4 lab* setcolor L70E04SP.PS / TXT / PDF L70E04SP.DAT

L70E05NP.PS / TXT / PDF 5 LAB* setcolor L70E05SP.PS / TXT / PDF L70E05SP.DAT

L70E06NP.PS / TXT / PDF 6 000n* setcmykcolor L70E06SP.PS / TXT / PDF L70E06SP.DAT

L70E07NP.PS / TXT / PDF 7 w* setgray L70E07SP.PS / TXT / PDF L70E07SP.DAT

Table 3: For PDF output with linearising data in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.

*) Only the PDF file L70E03SP.PS is transferred with the file L70E03SP.DAT which uses the parameter i*ptrsc=3 in the Distiller Startup (S) Directory. The other L..SP files of the Table 3 are distilled with the default file Example.ps in the Distiller Startup (S) Directory.

Remark: With the files of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.

The input PS operator no. 0 and the output PS operators no. 0 to 7 are used in the files.The input PS operator(s) of the NA or NP file are transferred to the output PS operator(s) in the FA, FP or SP file by the PS MTL code.

For further information and discussion of the results in the achromatic case with similar files see DE811

For further information and discussion of the results in the chromatic case with similar files see DE841

Compare the final result in DE811 and DE841. The Colour Workflow (CW) and the Output Linearisation (OL) of the PS MTL code is based on ISO/IEC 15775 and DIS ISO/IEC 19839-X. The PS MTL code is compatible to CIELAB and fulfils the basic user requirements in the field of image technology. The result is the same in the achromatic and chromatic case.

------
The ISO/IEC-test charts according to ISO/IEC 15775 and DIS ISO/IEC 19839-1 to -4 with english text: IE13
The ISO/IEC-test charts according to ISO/IEC 15775 and DIS ISO/IEC 19839-1 to -4 with german text: IG13
The DIN-test charts according to DIN 33866-1 to -5 with german text: DG13
The DIN-test charts according to DIN 33866-1 to -5 with english text: DE13

Digital Asian ISO/IEC-test charts with english text: http://www.jbmia.or.jp/~isoiec/sc28/testchart/index.htm

change to DE (information about DIN 33866-1 to 5: 2000-07 in english)
change to DG (information about DIN 33866-1 to 5: 2000-07 in german)
change to IE (information about ISO/IEC 15775: 1999-12 and DIS ISO/IEC 19839-1 to 4: 2000-04 in english)
change to IG (information about ISO/IEC 15775: 1999-12 and DIS ISO/IEC 19839-1 to 4: 2000-04 in german)

go to DE.HTM

go to home page no. 2 of DIN 33871, form 3, A4 landscape
Yield and emission: Colour Workflow (CW) by the input operator no. 0
and different output PS operators and Output Linearisation (OL)

For this page in german with CIELAB data of surface colours for OL, see BG70
For a previous similar page in english with CIELAB data of surface colours for OL, see BE69
For a next similar page in english with CIELAB data of surface colours for OL, see BE71

Fig. 1: Output layout of all the files in the following tables 1 to 3, see L70E00NA.EPS / GIF / PDF

For information about the parameter i*ptrsc (number 0 to 7) used for input or output PS operators, see DE802

For information about the ISO/IEC-test charts and separate parts (Fig. XY) with different input PS operators and discussion, see BE601