Fig. 1: Output layout without the MTL code in the N File (N = No MTL code in the file), see
D86E00N1.PS / TXT / JPG / PDF
181212 and 030101: A/JE86/JE86D.HTM
For this page, see
JE86 in English or
JG86 in German.
For the previous page, see
JE85 in English or
JG85 in German.
For the next page, see
JE87 in English or
JG87 in German.
Back to the main page of this colour series, see
../JE in English or
../JG in German.
For this page without
and with MTL code (N and F file) for OL with CJEXYZ data of luminous colours
and room luminance reflectances:
Yr=0.00, see JE86A in English and
JG86A in German
Yr=2.52 (standard), see JE86B in English and
JG86B in German
Yr=5.04, see JE86C in English and
JG86C in German
Yr=7.56, see JE86D in English and
JG86D in German
Fig. 1: Output layout without the MTL code in the N File (N =
No MTL code in the file), see
D86E00N1.PS / TXT
/ JPG / PDF
Fig. 2: Output layout uses the MTL code with example "linear
direct" CIEXYZ output data
for luminance reflectance Yr=0.00 in the F File (F = MTL code
in the File)
which produce "equal" output compared to Fig. 1, see
D86E00F1.PS / TXT
/ JPG / PDF
Remark: The files of the tables 1 to 3 include the linearising data for one of the model devices A, C, D (=Linear spaced in CIELAB for the room reflections Yr=0,00, 5,04, 7.06 ) and the tables 4 to 6 include the same linearising data for the same model devices but allow to modify the CIEXYZ data for the linearized monitor output equally spaced for the different room reflections.
|
and start files *NP.PS / .TXT /.PDF 140 / 140 / 25 kByte |
Output PS operator parameter i*ptrsc |
Colorimetric transfer from the input PS operator no. 0 to the output PS operators no. 0 to 7 defined by i*ptrsc |
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF 240 / 240 / 25 kByte |
100 kByte |
| D86E00NP.PS / TXT / PDF | 0 | cmy0* setcmykcolor and 000n* setcmykcolor | D86E00FP.PS / TXT / PDF | D86E00FP.DAT |
| D86E01NP.PS / TXT / PDF | 1 | olv* setrgbcolor and w* setgray | D86E01FP.PS / TXT / PDF | D86E01FP.DAT |
| D86E02NP.PS / TXT / PDF | 2 | cmy0* setcmykcolor and nnn0* setcmykcolor | D86E02FP.PS / TXT / PDF | D86E02FP.DAT |
| D86E03NP.PS / TXT / PDF | 3 | olv* setrgbcolor and www* setrgbcolor | D86E03FP.PS / TXT / PDF | D86E03FP.DAT |
| D86E04NP.PS / TXT / PDF | 4 | lab* setcolor | D86E04FP.PS / TXT / PDF | D86E04FP.DAT |
| D86E05NP.PS / TXT / PDF | 5 | LAB* setcolor | D86E05FP.PS / TXT / PDF | D86E05FP.DAT |
| D86E06NP.PS / TXT / PDF | 6 | 000n* setcmykcolor | D86E06FP.PS / TXT / PDF | D86E06FP.DAT |
| D86E07NP.PS / TXT / PDF | 7 | w* setgray | D86E07FP.PS / TXT / PDF | D86E07FP.DAT |
Table 1: For PDF start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.
Remark: With the files* of Table 1 it
is intended to produce only a PDF output with linearisation data
in the File (F) and not a PS output.
* Files on www server: ..00(NP,FP,NA,FA,SP).
|
and start files *NA.PS / .TXT 140 / 140 kByte |
Output PS operator parameter i*ptrsc |
Colorimetric transfer from the input PS operator no. 0 to the output PS operators no. 0 to 7 defined by i*ptrsc |
L=Linear data (no change of scaling of output) in files *FA.PS / TXT 240 / 240 kByte |
100 kByte |
| D86E00NA.PS / TXT | 0 | cmy0* setcmykcolor and 000n* setcmykcolor | D86E00FA.PS / TXT | D86E00FA.DAT |
| D86E01NA.PS / TXT | 1 | olv* setrgbcolor and w* setgray | D86E01FA.PS / TXT | D86E01FA.DAT |
| D86E02NA.PS / TXT | 2 | cmy0* setcmykcolor and nnn0* setcmykcolor | D86E02FA.PS / TXT | D86E02FA.DAT |
| D86E03NA.PS / TXT | 3 | olv* setrgbcolor and www* setrgbcolor | D86E03FA.PS / TXT | D86E03FA.DAT |
| D86E04NA.PS / TXT | 4 | lab* setcolor | D86E04FA.PS / TXT | D86E04FA.DAT |
| D86E05NA.PS / TXT | 5 | LAB* setcolor | D86E05FA.PS / TXT | D86E05FA.DAT |
| D86E06NA.PS / TXT | 6 | 000n* setcmykcolor | D86E06FA.PS / TXT | D86E06FA.DAT |
| D86E07NA.PS / TXT | 7 | w* setgray | D86E07FA.PS / TXT | D86E07FA.DAT |
Table 2: For PS start output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.
Remark: With the files* of Table 2 it is intended to produce only a PS output and not a PDF output.
|
and start files *NP.PS / .TXT /.PDF 140 / 140 / 25 kByte |
Output PS operator parameter i*ptrsc |
Colorimetric transfer from the input PS operator no. 0 to the output PS operators no. 0 to 7 defined by i*ptrsc |
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF 240 / 240 / 25 kByte |
100 kByte |
| D86E00NP.PS / TXT / PDF | 0 | cmy0* setcmykcolor and 000n* setcmykcolor | D86E00SP.PS / TXT / PDF *) | D86E00SP.DAT |
| D86E01NP.PS / TXT / PDF | 1 | olv* setrgbcolor and w* setgray | D86E01SP.PS / TXT / PDF | D86E01SP.DAT |
| D86E02NP.PS / TXT / PDF | 2 | cmy0* setcmykcolor and nnn0* setcmykcolor | D86E02SP.PS / TXT / PDF | D86E02SP.DAT |
| D86E03NP.PS / TXT / PDF | 3 | olv* setrgbcolor and www* setrgbcolor | D86E03SP.PS / TXT / PDF | D86E03SP.DAT |
| D86E04NP.PS / TXT / PDF | 4 | lab* setcolor | D86E04SP.PS / TXT / PDF | D86E04SP.DAT |
| D86E05NP.PS / TXT / PDF | 5 | LAB* setcolor | D86E05SP.PS / TXT / PDF | D86E05SP.DAT |
| D86E06NP.PS / TXT / PDF | 6 | 000n* setcmykcolor | D86E06SP.PS / TXT / PDF | D86E06SP.DAT |
| D86E07NP.PS / TXT / PDF | 7 | w* setgray | D86E07SP.PS / TXT / PDF | D86E07SP.DAT |
Table 3: For PDF start output with linearising data for one of the model devices A, C, D in Startup (S); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.
*) Please transfer e. g. the PDF file D86E00SP.PS with the file D86E00SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file D86E00FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.
Remark: With the files* of Table 3 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.
Remark: The files of the tables 1 to 3 include the linearising data for the model device L (L=Linear) and the tables 1 to 3 include the linearising data for the model devices S or Q (S=Square Root, Q=Quadratic) or real printer devices F, O or T for the linearized printer output.
|
and start files *NP.PS / .TXT /.PDF 140 / 140 / 25 kByte |
Output PS operator parameter i*ptrsc |
Colorimetric transfer from the input PS operator no. 0 to the output PS operators no. 0 to 7 defined by i*ptrsc |
L=Linear data (no change of scaling of output) in files *FP.PS / TXT / PDF 240 / 240 / 25 kByte |
100 kByte |
| D86E10NP.PS / TXT / PDF | 0 | cmy0* setcmykcolor and 000n* setcmykcolor | D86E10FP.PS / TXT / PDF | D86E10FP.DAT |
| D86E11NP.PS / TXT / PDF | 1 | olv* setrgbcolor and w* setgray | D86E11FP.PS / TXT / PDF | D86E11FP.DAT |
| D86E12NP.PS / TXT / PDF | 2 | cmy0* setcmykcolor and nnn0* setcmykcolor | D86E12FP.PS / TXT / PDF | D86E12FP.DAT |
| D86E13NP.PS / TXT / PDF | 3 | olv* setrgbcolor and www* setrgbcolor | D86E13FP.PS / TXT / PDF | D86E13FP.DAT |
| D86E14NP.PS / TXT / PDF | 4 | lab* setcolor | D86E14FP.PS / TXT / PDF | D86E14FP.DAT |
| D86E15NP.PS / TXT / PDF | 5 | LAB* setcolor | D86E15FP.PS / TXT / PDF | D86E15FP.DAT |
| D86E16NP.PS / TXT / PDF | 6 | 000n* setcmykcolor | D86E16FP.PS / TXT / PDF | D86E16FP.DAT |
| D86E17NP.PS / TXT / PDF | 7 | w* setgray | D86E17FP.PS / TXT / PDF | D86E17FP.DAT |
Table 4: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in FP file which are transferred by the PS MTL code.
Remark: With the files* of Table 4 it is intended to produce only a PDF output with linearisation data in the File (F) and not a PS output.
|
and start files *NA.PS / .TXT 140 / 140 kByte |
Output PS operator parameter i*ptrsc |
Colorimetric transfer from the input PS operator no. 0 to the output PS operators no. 0 to 7 defined by i*ptrscc |
L=Linear data (no change of scaling of output) in files *FA.PS / TXT 240 / 240 kByte |
100 kByte |
| D86E10NA.PS / TXT | 0 | cmy0* setcmykcolor and 000n* setcmykcolor | D86E10FA.PS / TXT | D86E10FA.DAT |
| D86E11NA.PS / TXT | 1 | olv* setrgbcolor and w* setgray | D86E11FA.PS / TXT | D86E11FA.DAT |
| D86E12NA.PS / TXT | 2 | cmy0* setcmykcolor and nnn0* setcmykcolor | D86E12FA.PS / TXT | D86E12FA.DAT |
| D86E13NA.PS / TXT | 3 | olv* setrgbcolor and www* setrgbcolor | D86E13FA.PS / TXT | D86E13FA.DAT |
| D86E14NA.PS / TXT | 4 | lab* setcolor | D86E14FA.PS / TXT | D86E14FA.DAT |
| D86E15NA.PS / TXT | 5 | LAB* setcolor | D86E15FA.PS / TXT | D86E15FA.DAT |
| D86E16NA.PS / TXT | 6 | 000n* setcmykcolor | D86E16FA.PS / TXT | D86E16FA.DAT |
| D86E17NA.PS / TXT | 7 | w* setgray | D86E17FA.PS / TXT | D86E17FA.DAT |
Table 5: For PS linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NA file and output PS operators no. 0 to 7 in the in FA file which are transferred by the PS MTL code.
Remark: With the files* of Table 5 it is intended to produce only a PS output and not a PDF output.
|
and start files *NP.PS / .TXT /.PDF 140 / 140 / 25 kByte |
Output PS operator parameter i*ptrsc |
Colorimetric transfer from the input PS operator no. 0 to the output PS operators no. 0 to 7 defined by i*ptrsc |
L=Linear data (no change of scaling of output) in files *SP.PS / TXT / PDF 240 / 240 / 25 kByte |
100 kByte |
| D86E10NP.PS / TXT / PDF | 0 | cmy0* setcmykcolor and 000n* setcmykcolor | D86E10SP.PS / TXT / PDF *) | D86E10SP.DAT |
| D86E11NP.PS / TXT / PDF | 1 | olv* setrgbcolor and w* setgray | D86E11SP.PS / TXT / PDF | D86E11SP.DAT |
| D86E12NP.PS / TXT / PDF | 2 | cmy0* setcmykcolor and nnn0* setcmykcolor | D86E12SP.PS / TXT / PDF | D86E12SP.DAT |
| D86E13NP.PS / TXT / PDF | 3 | olv* setrgbcolor and www* setrgbcolor | D86E13SP.PS / TXT / PDF | D86E13SP.DAT |
| D86E14NP.PS / TXT / PDF | 4 | lab* setcolor | D86E14SP.PS / TXT / PDF | D86E14SP.DAT |
| D86E15NP.PS / TXT / PDF | 5 | LAB* setcolor | D86E15SP.PS / TXT / PDF | D86E15SP.DAT |
| D86E16NP.PS / TXT / PDF | 6 | 000n* setcmykcolor | D86E16SP.PS / TXT / PDF | D86E16SP.DAT |
| D86E17NP.PS / TXT / PDF | 7 | w* setgray | D86E17SP.PS / TXT / PDF | D86E17SP.DAT |
Table 6: For PDF linearized output with linearising data for one of the model devices A, C, D in File (F); Input PS operator no. 0 in the NP file and output PS operators no. 0 to 7 in the in SP file which are transferred by the PS MTL code.
*) Please transfer e. g. the PDF file D86E10SP.PS with the file D86E10SP.DAT in the Distiller Startup (S) Directory,which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output ans the file D86E10FP.PDF of the Table 2. All L..SP files of the Table 3 are distilled here with only the default file Example.ps in the Distiller Startup (S) Directory.
Remark: With the files* of Table 6 it is intended to produce only a PDF output with linearisation data in the Distiller Startup (S) Directory and not a PS output.
-------
For an introduction (archive 2000-2009) to all folders
compared to this folder JE86, see
../JE.HTM in English or
../JG.HTM in German.
For information (archive 2000-2009) about International and
National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or
../4STAG.html in German.
For information (archive 2000-2009) about colour test charts
and colorimetric calculations, see
../indexAE.html in English or
../indexAG.html in German.
For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or
../XY91AG.html in German.
Back to the main page of the TU web site
(not archive), see
../../index.html in English or
../../indexDE.html in German.
The last link may not work, if you have visited
directly this archive site.
Then go to the main page of one of the
two TU web sites in a new window, see
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.