030601: A/CE60/CE60L.HTM
Any NP file produces 1 page for a maximum luminous contrast ratio
of the (ideal) display without reflection of any room lighting.
Any FP file (of Table 1 to 3) shows 8 gray series on 2 to 8 pages
for 8 different contrast ratios which depend on the display reflection
for white and black in the office.
The 16 steps and the Landolt-rings are recognized best only for
one of the 8 gray series.
The PS file may be used for the correction of the initial display
output either by 16 measured Y luminance reflectance data (see directories
..60 to 69) or 16 L* lightness data
(see directories ..70 to ..78).
For this page without and
with MTL code for OL with CIELAB data of surface colours,
for the device L=Linear,
see CE60L in english
or CG60L in german,
for the previous similar page,
see CE59L in english
or CG59L in german
for the next similar page,
see CE61L in english
or CG61L in german
The output of the S...FP files is darker compared to the output of the L...FP files. For all the files S...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see CE60S in english or CG60S in german
The output of the Q...FP files is lighter compared to the output of the L...FP files. For all the files Q...(NP/NA/FP/FA/SP) instead of L...(NP/NA/FP/FA/SP) see CE60Q in english or CG60Q in german
Fig. LN1: Output layout of all the L...NP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see L60E00N1.PS
/ TXT / JPG
/ PDF
Fig. LF1: Output layout of all the L...FP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see L60E00F1.PS
/ TXT / JPG
/ PDF
Fig. SF1: Output layout of all the S...FP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see S60E00F1.PS
/ TXT / JPG
/ PDF
Fig. QF1: Output layout of all the Q...FP files with the format A6 (here)
and A4 in the following tables no. 1 to 3,
see Q60E00F1.PS
/ TXT / JPG
/ PDF
Remark 1: The files* of Tables 1 to 3 may produce more than one page layout shown in Fig. LN1
Remark 2: The files* of Tables 1 to 3 produce the format A4 landscape.
Remark 3: The files* of Tables 1 to 3 include the linearising data for the device L = S and Q for the linearized output on this device L. The output of the FP file for the devices S and Q is darker and lighter compared to the output of the device L.
and start files *NP.PS / .TXT /.PDF 140 / 140 / 40 kByte |
PS operator parameter i*ptrsc |
input PS operator no. 0 (000n* setcmykcolor) to the output PS operator no. 0 (000n* setcmykcolor) defined by i*ptrsc |
with device CIELAB data of device L in files *FP.PS / TXT / PDF 240 / 240 / 140 kByte |
with device CIELAB data of device L 100 kByte |
L60E00NP.PS / TXT / PDF | =0,1,2, or 3 | L60E00FP.PS / TXT / PDF | L60E00FP.DAT |
Remark: The files* of Table 1 serve for
a PDF output with linearisation data in the File (F) and not for
a PS output.
* All the files are on www.ps.bam.de.
and start files *NA.PS / .TXT 140 / 140 kByte |
PS operator parameter i*ptrsc |
input PS operator no. 0 (000n* setcmykcolor) to the output PS operator no. 0 (000n* setcmykcolor) defined by i*ptrsc |
with device CIELAB data of device L in files *FA.PS / TXT 240 / 240 kByte |
with device CIELAB data of device L 100 kByte |
L60E00NA.PS / TXT | =0,1,2, or 3 | L60E00FA.PS / TXT | L60E00FA.DAT |
Remark: The files* of Table 2 serve for a PS output and not for a PDF output.
and start files *NP.PS / .TXT /.PDF 140 / 140 / 40 kByte |
PS operator parameter i*ptrsc |
input PS operator no. 0 (000n* setcmykcolor) to the output PS operator no. 0 (000n* setcmykcolor) defined by i*ptrsc |
without device CIELAB data of device L in files *SP.PS / TXT / PDF 240 / 240 / 140 kByte |
with device CIELAB data of device L 100 kByte |
L60E00NP.PS / TXT / PDF | =0,1,2, or 3 | L60E00SP.PS / TXT / PDF *) | L60E00SP.DAT |
*) Please transfer e. g. the PDF file L60E00SP.PS with the file L60E00SP.DAT in the Distiller Startup (S) Directory, which uses the parameter i*ptrsc=0. Then this PDF-file produces the same output as the file L60E00FP.PDF of the Table 2. All the files L60E1xSP.PS (x=0,7) of the Table 3 are distilled with only the default file Example.ps in the Distiller Startup (S) Directory.
Remark: The files* of Table 3 serve for a PDF output with linearisation data L60E00SP.DAT in the Distiller Startup (S) directory and not for a PS output.
-------
For an introduction (archive 2000-2009) to all folders
compared to this folder CE60, see
../CE.HTM in English or
../CG.HTM in German.
For information (archive 2000-2009) about International and National Standards, Technical Reports, and Meetings, see
../4STAE.html in English or
../4STAG.html in German.
For information (archive 2000-2009) about colour test charts and colorimetric calculations, see
../indexAE.html in English or
../indexAG.html in German.
For publications (archive 2000-2009) of the BAM research group, see
../XY91AE.html in English or
../XY91AG.html in German.
back to the main page of the TU web site
../../index.html in English.
The last link may not work, if you have visited directly this archive site.
Then go to the main page of one of the two TU web sites in a new window
http://farbe.li.tu-berlin.de/index.html or
http://130.149.60.45/~farbmetrik/index.html.